by Tim Toth | Jul 27, 2018 | Blog, Injection Molds
Injection Molding Process An injection mold used in the injection molding process, consists of a two piece mold that is opened and closed to allow plastic to be injected under tremendous pressure when the mold is closed, to create a part. After a short...
by Tim Toth | Jul 13, 2018 | Blog, Miscellaneous
Toth Mold/Die Inc. – 3 Brothers & An Old School Father! When we started out some 41 years ago it was a crazy time. Picture three brothers that did not know much at all about the injection molding/mold building trade starting to work for our very...
by Tim Toth | Jun 7, 2018 | Blog, Injection Molding
In my opinion, the injection molding process is the quickest and most reliable form of producing a thermoplastic part. Cycle times can be as fast as three seconds and can produce one to 128 parts with each cycle. The repeatability of the part dimension is...
by Tim Toth | Jun 26, 2015 | Blog, Injection Molding
Since I have been in the injection molding trade, scheduling production runs has changed drastically over the years. When I first started in the injection molding trade, scheduling production runs were very predictable. Companies would forecast what their expected...
by Tim Toth | Jun 10, 2015 | Blog, Injection Molding
One of our customers approached Toth Mold/Die Inc. with a request to produce a 5 in. long tube with a .375 in. o.d. x .265 in. i.d. using the injection molding process. The reason for injection molding this part and not extruding it was because the length of the part...