by Tim Toth | Oct 11, 2018 | Blog, Injection Molding
As a rule, an injection mold should be made for only one type of product. The main reason for this is that the different shapes may have different molding characteristics and the slower running shape will control the molding cycle and production output....
by Tim Toth | Sep 22, 2018 | Blog, Injection Molding
After your part is developed and ready to go into the production phase, the size of the injection molding machine needs to be chosen. Determining the number of cavities in the mold is usually dictated by part cost and production time requirements. This will be...
by Tim Toth | Sep 12, 2018 | Blog, Injection Molding
Electronic products usually require EMI/RFI shielding. Parts require a secondary operation to apply either foil, paints, vacuum metalization among other applications. Toth Mold/Die Inc. has been producing a part for over 10 years with an EMI/RFI shielding resin. The...
by Tim Toth | Aug 31, 2018 | Blog, Inventors
Toth Mold/Die Inc. recently celebrated their 35th anniversary in injection molding and injection mold building. We have performed work for both small and large companies. I think back to some of our customers that have been inventors and wonder where some of them...
by Tim Toth | Aug 11, 2018 | Blog, Inventors
Outlined below are “7 Easy Steps” that will guide you in the successful development of a product using the injection molding process. 1. Product Concept This is your idea of a product that you think has a good chance of selling. This could range from just an idea in...
