by Tim Toth | Oct 29, 2018 | Blog, Miscellaneous, Troubleshooting
When you have been in the injection molding trade as long as I have, it sometimes gets a little stagnant as far as building and running molds. “I like having to build an injection mold that no one else wants to attempt.” The thing I thrive on the most in...
by Tim Toth | Oct 28, 2018 | Blog, Troubleshooting
Being the owner of an injection molding business as well as a mold maker for 36 years, I have encountered a variety of problems with molds, machines and molded parts. Sometimes the fix for the problem is so obvious that you just pass it right up. I would like to share...
by Tim Toth | Oct 11, 2018 | Blog, Injection Molding
As a rule, an injection mold should be made for only one type of product. The main reason for this is that the different shapes may have different molding characteristics and the slower running shape will control the molding cycle and production output....
by Tim Toth | Jun 7, 2018 | Blog, Injection Molding
In my opinion, the injection molding process is the quickest and most reliable form of producing a thermoplastic part. Cycle times can be as fast as three seconds and can produce one to 128 parts with each cycle. The repeatability of the part dimension is...
by Tim Toth | May 22, 2014 | Blog, Miscellaneous
Toth Mold/Die Inc. has just celebrated our 32nd anniversary of being in the injection molding industry. It has been a quick 32 years and very eventful. A lot of things come to mind when I think back to 1982. My two brothers, my father and myself were running...
