by Tim Toth | May 27, 2021 | Blog, Miscellaneous
I was showing molded parts to a customer from our display case and a particular project brought back many memories. This month, we proudly celebrate our 39th business anniversary. We started Toth Mold/Die Inc. in 1982 but we actually have 45 years in the injection...
by Tim Toth | Jun 10, 2015 | Blog, Injection Molding
One of our customers approached Toth Mold/Die Inc. with a request to produce a 5 in. long tube with a .375 in. o.d. x .265 in. i.d. using the injection molding process. The reason for injection molding this part and not extruding it was because the length of the part...
by Tim Toth | Feb 27, 2014 | Blog, Miscellaneous
I have been building molds and also injection molding for over 30 years. Technology keeps us moving forward. When I was learning the trade, it was a trade that I knew you had to be committed to. The time that was involved in learning all of the different steps from...
by Tim Toth | Feb 19, 2014 | Blog, Injection Molds
There is a large selection of different types of steel used for various applications in the manufacturing of all types of products. In the injection molding industry, there are common steels used for different parts of an injection mold. One of the driving...
by Tim Toth | Feb 14, 2014 | Blog, Troubleshooting
Injection Molding – Injection Molding Process During the injection molding process, issues arise with part quality, part cosmetics and part dimensions. These issues are resolved through the injection molding process parameters and/or modifications with the...
