by Tim Toth | Mar 16, 2021 | Blog, Injection Molding, Inventors
Developing plastic parts using the injection molding process first begins with a concept whether it is a new product or changing/re-designing an existing one. Second will be the design stage. Once these two steps are completed, often a 3-D printed part is made to test...
by Tim Toth | Feb 6, 2014 | Blog, Injection Molds
A prototype mold is low cost injection molding tooling mainly used in order to obtain working parts. Modifications can easily be made quickly to this type of tooling. Life expectancy of this type of mold is approximately up to 1,000 parts. Some of the parts can be...
by Tim Toth | Dec 11, 2013 | Blog, Injection Molds
In injection molding, parts can be molded with either male or female threads. Male threads are less complicated to produce than female threads. Male threads are cast as an open and shut injection mold except in some instances where the rest of the part design...
by Tim Toth | Oct 4, 2013 | Blog, Injection Molds
Injection Molded Part A prototype mold is low cost tooling mainly used in order to obtain working parts. Modifications can easily be made quickly to this type of tooling. Life expectancy of this type of mold is approximately up to 1,000 parts. Low volume tooling is a...
