by Tim Toth | Sep 22, 2018 | Blog, Injection Molding
After your part is developed and ready to go into the production phase, the size of the injection molding machine needs to be chosen. Determining the number of cavities in the mold is usually dictated by part cost and production time requirements. This will be...
by Tim Toth | Aug 31, 2018 | Blog, Inventors
Toth Mold/Die Inc. recently celebrated their 35th anniversary in injection molding and injection mold building. We have performed work for both small and large companies. I think back to some of our customers that have been inventors and wonder where some of them...
by Tim Toth | Jul 27, 2018 | Blog, Injection Molds
Injection Molding Process An injection mold used in the injection molding process, consists of a two piece mold that is opened and closed to allow plastic to be injected under tremendous pressure when the mold is closed, to create a part. After a short...
by Tim Toth | Jun 7, 2018 | Blog, Injection Molding
In my opinion, the injection molding process is the quickest and most reliable form of producing a thermoplastic part. Cycle times can be as fast as three seconds and can produce one to 128 parts with each cycle. The repeatability of the part dimension is...
by Tom Toth | Aug 21, 2016 | Blog, Injection Molding
Scheduling and running production of injection molded parts is an important operation of any molding company. Most molding companies usually have several sizes of injection molding machines which are categorized by the shot size and also the tonnage. Shot size means...
