by Tim Toth | Mar 12, 2014 | Blog, Injection Molds
If you have never had a part injection molded before, there are a number of important factors you will need to know before you get too far into a project. Assuming you have your part or parts designed and already have working prototypes, the next step is to get set up...
by Tim Toth | Mar 5, 2014 | Blog, Miscellaneous
Injection molding machine operators are an important factor in the final injection molded part that is produced. There are a wide range of skill levels required from injection molding machine operators. The first level is rather easy and basically requires little...
by Tim Toth | Feb 27, 2014 | Blog, Miscellaneous
I have been building molds and also injection molding for over 30 years. Technology keeps us moving forward. When I was learning the trade, it was a trade that I knew you had to be committed to. The time that was involved in learning all of the different steps from...
by Tim Toth | Feb 19, 2014 | Blog, Injection Molds
There is a large selection of different types of steel used for various applications in the manufacturing of all types of products. In the injection molding industry, there are common steels used for different parts of an injection mold. One of the driving...
by Tim Toth | Feb 14, 2014 | Blog, Troubleshooting
Injection Molding – Injection Molding Process During the injection molding process, issues arise with part quality, part cosmetics and part dimensions. These issues are resolved through the injection molding process parameters and/or modifications with the...
