by Tim Toth | Oct 28, 2018 | Blog, Troubleshooting
Being the owner of an injection molding business as well as a mold maker for 36 years, I have encountered a variety of problems with molds, machines and molded parts. Sometimes the fix for the problem is so obvious that you just pass it right up. I would like to share...
by Tim Toth | Sep 22, 2018 | Blog, Injection Molding
After your part is developed and ready to go into the production phase, the size of the injection molding machine needs to be chosen. Determining the number of cavities in the mold is usually dictated by part cost and production time requirements. This will be...
by Tim Toth | Aug 31, 2018 | Blog, Inventors
Toth Mold/Die Inc. recently celebrated their 35th anniversary in injection molding and injection mold building. We have performed work for both small and large companies. I think back to some of our customers that have been inventors and wonder where some of them...
by Tim Toth | Aug 11, 2018 | Blog, Inventors
Outlined below are “7 Easy Steps” that will guide you in the successful development of a product using the injection molding process. 1. Product Concept This is your idea of a product that you think has a good chance of selling. This could range from just an idea in...
by Tim Toth | Jul 27, 2018 | Blog, Injection Molds
Injection Molding Process An injection mold used in the injection molding process, consists of a two piece mold that is opened and closed to allow plastic to be injected under tremendous pressure when the mold is closed, to create a part. After a short...