by Tim Toth | Sep 1, 2020 | Blog, Troubleshooting
One of the most common problems in injection molding is determining the shrinkage rate of a part that is going to be injection molded. Material data sheets provide a shrinkage rate for the material that is going to be used for a part. However, this rate is only a...
by Tim Toth | Nov 22, 2018 | Blog, Miscellaneous
Injection Molding Family Business I am sitting here thinking about the upcoming Thanksgiving holiday and what I am thankful for. First what comes to mind, is that I am very blessed with a wonderful family who has always supported me and understood the commitment that...
by Tim Toth | Oct 28, 2018 | Blog, Troubleshooting
Being the owner of an injection molding business as well as a mold maker for 36 years, I have encountered a variety of problems with molds, machines and molded parts. Sometimes the fix for the problem is so obvious that you just pass it right up. I would like to share...
by Tim Toth | Aug 31, 2018 | Blog, Inventors
Toth Mold/Die Inc. recently celebrated their 35th anniversary in injection molding and injection mold building. We have performed work for both small and large companies. I think back to some of our customers that have been inventors and wonder where some of them...
by Tim Toth | Jul 27, 2018 | Blog, Injection Molds
Injection Molding Process An injection mold used in the injection molding process, consists of a two piece mold that is opened and closed to allow plastic to be injected under tremendous pressure when the mold is closed, to create a part. After a short...