DESIGNING

Toth Mold/Die Inc. Since 1982

Mold Design

Toth Mold/Die Inc. has been designing molds for over 35 years.  After optimizing the part design, the next step is to have a mold built so the part can be injection molded.  Some molds can be very complex due to the parting line, holes, threads and undercuts.  With today’s design software, the geometry of a part can be produced without any limits.  The parting line of a mold could be very complex to produce.  Toth Mold/Die Inc. has the ability to design any style of parting line that is needed.  Casting internal threads and any style undercut also adds to the complexity of the mold.  The mold will usually require unscrewing the threads, cam action movement for slides, and gating of the part is a step that needs to be done by an experienced mold designer.  Toth Mold Die Inc. has built and also runs hundreds of molds.  With our experience in both injection mold building and injection molding, we can simplify your part in the design stage to make it affordable to produce.

Contact Toth Mold/Die Inc. Today

Please click on the button below, we’re looking forward to hearing from you!

Continue